多路投影拼接融合处理器，最高支持1920X1200,可以多台级联。

1、设备概况介绍

投影拼接融合处理器又称边缘融合处理器。主要功能是将多台投影机显示单元拼接融合成一个超高分辨率的逻辑显示器，且能确保每个画面图像质量不受损失。可以实现超高分辨率电子地图、地理信息系统、工业流程图、工业监控信息等全屏幕的清晰显示。系统具备融合边带羽化、颜色矫正、几何校正等功能。相对于融合和拼接分离的融合系统，具有系统结构模块化，紧凑、调试简单、易升级维护等优势。

2、融合带羽化处理

融合带的羽化处理，是将两个投影机投射画面的重叠部分，分别做图像强度的线性变化，让两个投影机投射的画面重叠部分图像强度与融合带两侧没有经过重叠部分的图像强度相一致，最后产生一个强度均匀，色彩一致的融合画面。内置多条线性Gamma曲线，以适应各种不同类型的投影显示技术，如液晶投影、DLP技术投影、激光投影等

3、投影机亮度及颜色辅助调整

支持色域校正技术，由于生产工艺原因，即使使用同品牌同型号同批次的投影机，两台投影之间也会存在色差，通过现合处理器自带的色域校正系统，可对每一台投影机输出的画面做独立调整，从而使多台投影机输出的色彩一致，融合后图像颜色一致性更好。

4、任意几何校正

支持任意曲面图像矫正，独立生成网格，可任意设置节点完成局部调整，在异形幕上进行图像校正，支持各种异形融合模式。

5、全同步数据处理技术

拼接融合处理器是单时钟纯数字图像处理设备，所有信号在系统主时钟的控制下同时进行处理，做到了系统全同步效果，从而从根本上消除了信号不同步问题。在播放高速动态视频时，图像整齐、流畅，不存在图像撕裂现象。

6、纯硬件架构，稳定可靠

具备优异的图像处理性能，完全规避PC架构启动速度慢、硬件冲突、计算机病毒的困扰、计算机用久之后越用越卡的问题。

1、Projection splicing fusion processor, also known as edge fusion processor.

  The main function is to combine multiple projector display units into a super high resolution logical display, and can ensure that the image quality of each picture is not lost. It can realize the clear display of ultra-high resolution electronic map, geographic information system, industrial flow chart, industrial monitoring information and other full screen. The system has the functions of blending side - band emergence, color correction, geometric correction, etc. Compared with fusion and splicing separation fusion system, it has the advantages of modular system structure, compact, simple debugging, easy upgrade and maintenance.

2、Fusion with feather treatment.

  The feathering processing of the fusion belt is to make linear changes in the image intensity of the overlapping parts of the images projected by two projectors respectively, so that the image intensity of the overlapping parts of the images projected by two projectors is consistent with the image intensity of the non-overlapping parts on both sides of the fusion belt, and finally produce a fusion picture with uniform intensity and consistent color. Built-in multiple linear Gamma curves to adapt to various types of projection display technology, such as liquid crystal projection, DLP technology projection, laser projection, etc.

3、Auxiliary adjustment of projector brightness and color.

  Color gamut correction technology is supported. Due to the production process, even if the projectors of the same brand and same model with the same batch are used, there will be color difference between the two projectors. Through the color gamut correction system of the present processor, the output picture of each projector can be adjusted independently, so that the color output of multiple projectors is consistent, and the color consistency of the image after fusion is better.

4、Arbitrary geometric correction.

  Support any curved surface image correction, independent grid generation, arbitrary node can be set to complete local adjustment, image correction on the special-shaped screen, support a variety of special-shaped fusion modes.

5、Fully synchronous data processing technology.

  The splicing and fusion processor is a single clock pure digital image processing equipment. All signals are processed simultaneously under the control of the main clock of the system, so as to achieve the full synchronization effect of the system, thus fundamentally eliminating the problem of signal asynchronism. When playing high-speed dynamic video, the image is neat and smooth, and there is no image tearing phenomenon.

6.、Pure hardware architecture, stable and reliable.

  With excellent image processing performance, completely avoid PC architecture start speed slow, hardware conflict, computer virus, computer after a long time more and more card problem.